
Home Calendar Join the
SCRC Officers Chapter News Gallery
Riding Rules Links Chapter Forum
_______________________________________________________________________
Apple Valley SCRC Riding Rules
The
purpose of riding in an organized group instead of an undisciplined pack is to
provide the additional safety that a well-organized group inherently generates.
This comes from within the group and from the outside. When a group rides in an
orderly fashion, people don’t get in each other’s way, and the organization of
the formation itself discourages cars from attempting to cut in. I have even
seen trucks move to the far side of their lane to minimize wind blast when they
see a well-ordered formation "single up" and move as far away from
the truck as their lane allows.
Once
riding rules have been adopted by a club, EVERYONE riding with the club is
expected to follow them. Anyone violating the rules, and compromising everyone elses safety, will be warned, and if their actions
continue, will no longer be welcome to ride with the club.
The
following rules are compiled from a number of sources. Most clubs that ride in
orderly formations follow similar rules. Details may vary from one club to
another, sometimes because of the style of riding they do, or sometimes because
there are a number of reasonable options, so they chose the one they prefer.
Formation
Riding will be in a standard State Patrol (staggered) formation. In staggered
formation, the bikes form two columns, with the leader at the head of the
left column, so he will be able to view all bikes in the formation in
his/her rearview mirrors, and be able to see around vehicles the group
approaches. The second bike will head the right column, and will ride
approximately 1 second behind the leader (and in the opposite side of the
lane). The other riders will position their bikes 2 seconds behind the bike
directly in front of them, which puts them 1 second
behind the diagonal bike. This formation allows each rider sufficient safety
space, and discourages other vehicles from cutting into the line. The last
rider, or Tail Gunner, may ride on whichever side of the lane he prefers. He
will have to change sides during the ride, based on the situation at the moment.

Ride Leader
The Ride Leader must be aware of the
length of the columns, and must gauge the passing of merges, highway entrances
and exits, etc., to allow for maximum safety and keeping the group together. He
must make sure that he leaves enough time/space for the formation to get into
the appropriate lanes before exits, etc. All directions come from the Ride
Leader. The Ride Leader makes all decisions regarding lane changes, stopping
for breaks and fuel, closing of gaps, turning off at exits, any concerns of
what lies ahead, accepting/rejecting radioed messages
from other individuals, and so on. No individual will assert himself
independently without direction from the Ride Leader to do so.
Tail Gunner
The Tail Gunner serves as the eyes of the Ride Leader.
He watches the formation, and informs the Ride Leader of any potential problems
within the group. He watches other vehicles, and informs the Ride Leader (and
anyone else with radios) of hazardous conditions approaching from the rear,
such as vehicles trying to cut into the formation and trucks passing with
potentially dangerous wind blasts. He will watch for merging lanes, and will
move into a merging lane (or stay in a merging lane just vacated by the group)
in order to "close the door" on other vehicles that may otherwise
find themselves trying to merge into the formation. At the Ride Leader’s
request, the Tail Gunner changes lanes before the formation, to secure the lane
so the formation can move into it.
New Riders
The position of new (inexperienced with GROUP riding)
riders within the group is significant. New riders should be positioned as
close to the front as possible
Lane Changes
All lane changing starts with a radio request from the
Ride Leader to the Tail Gunner. The Tail Gunner will (when it is safe to do so)
move into the requested lane and will inform the Ride Leader when the lane is
clear.
At this point, the Ride Leader has three options.
Simple Lane Change . This is an ordinary lane change, and
can be used in most situations. After the Tail Gunner has secured the new
lane, the Ride Leader will put on his directional signal as an indication that
he is about to order a lane change. As each rider sees the directional signal,
he also turns his on, so the riders following him get the signal. The leader
then initiates the change. All other riders change lanes too. The important
concept is that NO ONE moves until the bike in front of him has started moving.
Block Lane Change . This can be used
interchangeably with the
Rear Fill-in . This is sometimes necessary if a long
enough gap cannot be maintained in the new lane, for example when trying to
move from the right lane to the center and vehicles from the left lane keep
cutting into the opening. After the Tail Gunner has secured the new lane,
the leader (usually at the suggestion of the Tail Gunner) will call for the
group to fill in the space from the rear. He signals this by raising his hand
to shoulder height and "pushing" it towards the new lane. All riders
repeat the signal, and the last bikes move into the space in the new lane ahead
of the Tail Gunner, then the next-to-last bikes move in ahead of those, and so
on until the Ride Leader finally moves into the space ahead of the entire
formation.
Emergencies
In the unlikely event of an emergency condition, the Ride Leader will make
every attempt to move the formation to the shoulder in an orderly manner. If a
bike breaks down, let the rider move to the right. DO NOT STOP. The Tail Gunner
will stop with the problem bike. The Ride Leader will lead the group to a safe
stopping place.
Tolls
The Ride Leader should be aware of
tolls and collect money from all riders in advance. When the formation arrives
at the toll booth, the Ride Leader pays for all bikes, and all bikes proceed
through the toll. Many toll booths have counters that count the number of
vehicles coming through. To accommodate these, ride through the toll booth one
at a time. If some people in the group are using EZ Pass, they will split out
from the group, and the formation will reform on the other side of the toll
booth. Make sure the Ride Leader knows in advance how many bikes he is paying
the toll for.
Hand Signals
Each rider (and passenger) should duplicate all hand
signals given by the rider in front of him, so that the signals get passed all
the way to the back of the formation. The following signals are used in
addition to the standard (right turn, left turn, slow/stop) hand signals.
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
START ENGINES: |
LEFT TURN: |
RIGHT TURN: |
HAZARD LEFT: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HAZARD RIGHT A: |
HAZARD RIGHT B: |
SPEED UP: |
SLOW DOWN: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STOP: |
SINGLE FILE: |
STAGGERED or SIDE-BY-SIDE FORMATION: |
TIGHTEN UP: |
|
|
|
||||
|
||||
Please report website problems to the Webmaster
© 2005-2008 Apple
Valley SCRC
The Southern Cruisers Riding Club Patch and Graphic Replicas are Trademarks
of the Southern Cruisers Riding Club, and may not be
duplicated or used in anyway, on or off line, without the express
permission of the Southern Cruisers Riding Club Trademark Owner. Other
Company Names and Trademarks used in Materials on this Website may be
Trademarks of their Respective Owners.